iSpindle Plotter

Collect and plot fermentation data from an iSpindel hydrometer.
Repo:F-Droid.Org
AppID:com.ispindle.plotter
Author:Ian Williams
License:MIT
Donation:
InRepoSince:2026-06-01
LastRepoUpdate:2026-10-08
LastAppUpdate:Unknown
LastVersion:0.5.24
Categories:Science & Education
APK source:
icon iSpindle Plotter is a self-hosted companion app for the iSpindel — an open-hardware floating hydrometer used by home brewers to track specific gravity through a fermentation. The app runs a small HTTP server on your phone that the iSpindel posts its readings to over your local Wi-Fi network, then stores, charts, and analyses those readings without ever sending your data to a third-party cloud service.

Pairing and configuration:

* Auto-pair flow that joins the iSpindel's configuration access point, sets the phone as the HTTP target (Generic HTTP / selAPI=3), reads the device's existing cubic calibration polynomial off the firmware, and reconnects to your home network — without losing pre-existing fields like the calibration on subsequent saves.
* mDNS-style hostname discovery so the iSpindel can find your phone again after either device's IP changes.
* Pushes the app's own calibration polynomial back to the iSpindel when you re-calibrate.

Calibration:

* Fit cubic / quadratic / linear polynomials from your own sucrose-dilution measurements.
* Imports the iSpindel's pre-installed factory calibration on first pairing.
* Setup guide with a sucrose-step-dilution recipe for 1.000–1.080 SG.

Plotting and analysis:

* Tilt angle, temperature, specific gravity, and battery voltage charts with a 24h / 7d / 30d / All time-window switcher.
* Potential-alcohol secondary axis on the SG chart.
* Robust phase classifier (Lag / Active / Slowing / Conditioning / Stuck / Cold crash) using a modified-Gompertz Levenberg-Marquardt fit (Zwietering et al. 1990), with fallback to an attenuation-prior when the data is too early to constrain the asymptote.
* Predicted final gravity overlaid on the chart with a tapering uncertainty band derived from short-time noise estimation and the calibration polynomial's residual.
* Battery runway estimate: linear discharge fit projecting time-to-cutoff at the current sample rate.
* Trim-before-date-and-time to drop pre-fermentation noise; CSV export via the system file picker.

Privacy:

* No analytics, no telemetry, no third-party network connections.
* Data is held only on your phone and only sent to your iSpindel's local IP for configuration writes.
* The app's HTTP server listens on the phone's local network address only.

Hardware: built and tested with an MTB iSpindel PCB 4.0; should work with any iSpindel firmware that supports the Generic HTTP target.

WhatsNew:

Added a drag-select for marking bad data, and spunding guidance on the
fermentation stage card.

Mark bad data: press and drag along the graph to select a time range
— for readings recorded while the spindle sat out of the wort, or
across a WiFi gap — and mark it. Marked spans show as a shaded band
on the chart and are listed under the Graph screen; they stop shaping
the plots, the stage detection and the model fits. The recorded data
itself is never deleted: excluded readings stay in the databa

Download Source Issues ChangeLog
1_en-US.png 2_en-US.png 3_en-US.png 4_en-US.png
While you can download the APKs here directly, you should preferably use an F-Droid client so the app stays up-to-date on your device.

Packages

Version 0.5.24 (2026-10-08) no RB details available help icon

Android Versions:
  • Target: 15.0
  • MinVer: 7.0
  • ABIs: arm64-v8a, armeabi-v7a, x86, x86_64

Download (16.3 M)

Version 0.5.23 (2026-06-20) no RB details available help icon

Version 0.5.22 (2026-06-18) no RB details available help icon